|
SPACE AGE PROTECTION FOR YOUR CAR, TRUCK,
BOAT, RV, AIRPLANE & MOTORCYCLE
RejeX is a thin-film polymer
coating designed to provide a high-release surface. This very thin film –
less than a micron thick – prevents stains and adhesion of common
contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road
grime, brake dust, etc. It also makes graffiti easy to remove and can be
applied to windshields to repel rain. It’s easy to apply and produces a
deep, lustrous shine that outlasts the most popular waxes by months.
RejeX contains none of the free silicone oils found in some other
products that are known to contaminate paint and cause problems when
repainting
APPLICATION
RejeX should be applied to a
cool (less than 85° F) dry surface out of direct sunlight. If the surface is
too hot, the coating will cure before it has properly bonded to the surface,
and it won’t perform up to its potential. RejeX is wiped on, allowed to dry
to a haze for approximately 20 minutes, wiped off, then allowed to cure for
12 hours.
PROTECTS AND BEAUTIFIES PAINTED METAL,
GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL
SURFACES
RejeX is not meant to be used on porous
surfaces, highly oxidized painted surfaces, or to fill fine scratches. RejeX
can be applied in multiple coats, allowing 8 hours curing time between coats
for deeper color and greater depth of gloss. RejeX has a higher
refractive index than waxes, so it produces richer, deeper looking
colors and a lustrous long-lasting finish.
16 oz. bottle $19.95 plus
shipping costs
|
